SANTA ROSA, Calif., May 29, 2018 – Keysight Technologies, Inc. (NYSE: KEYS), a leading technology company that helps enterprises, service providers, and governments accelerate innovation to connect and secure the world, along with the largest ecosystem of solution partners, will showcase solutions related to 5G Communications, Internet of Things (IoT), and Aerospace & Defense (A&D) at the International Microwave Symposium (IMS) in the Pennsylvania Convention Center in Philadelphia, June 10 – 15, 2018.
Keysight experts will be available at the company’s booth (#1325) to discuss simulation, design, and test topics revolving around:[Continue reading →]
NEW HIGH SPEED RECORDER 40 GBE DATA RECORDER CAPTURES >6 GB/S OF STREAMING DATA SPECIAL OPERATIONS FORCES INDUSTRY CONFERENCE (SOFIC) 2018, TAMPA, Fla. (Booth #1919) – May 21, 2018 – Curtiss-Wright’s Defense Solutions division today introduced the industry’s first two-channel 40 Gigabit Ethernet (GbE) digital data recorder designed to address the extremely high bandwidth data capture requirements of today’s most demanding ISR applications. The new High Speed Recorder 40 GbE (HSR40) is a SWaP-optimized digital data recorder that can capture UDP or TCP/IP data from two 40 GbE interfaces at sustained rates of over 6 GB/s. The challenge of capturing wire-rate data from today’s compute intensive ISR sensor platforms puts new meaning to the old metaphor “drinking from a firehose.” Some platforms have hundreds of cameras and other sensors generating data that needs to be captured and stored. What’s more, these critical sensor systems can’t be throttled in order for the recording system to catch up with the flow of data.
“Curtiss-Wright is committed to bringing the most advanced, rugged digital data recorder solutions to our Military and Aerospace customers,” said Lynn Bamford, Senior Vice President and General Manager, Defense Solutions division. “We are proud to announce the industry’s highest performance two-channel 40 Gigabit Ethernet data recorder, the new HSR40, which delivers unprecedented data capture capability to deployed ISR applications. It breaks through data bottlenecks to record vast amounts of critical data at full wirespeed.”[Continue reading →]
Army Aviation Mission Solutions Summit (Booth #1038), NASHVILLE, Tenn. - April 25, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) and Green Hills Software® today announced a close collaboration that has revolutionized the capabilities, performance and safety of next- generation flight display systems using multicore processor architectures. Mercury’s BuiltSAFE™ hardware and software portfolio delivers industry-leading size, weight and power (SwaP) for avionics computers and display systems, with a particular emphasis on mission systems, enhanced vision systems (EVS) and synthetic vision (SVS) systems for degraded visual environments (DVE).
Leveraging hundreds of person-years of in-house experience in safety-certified display computer design, Mercury Systems has launched the ROCK-2 avionics subsystem and BuiltSAFE OpenGL graphics suite, optimized to take advantage of the CAST-32A and ARINC-653 (Section 2, Supplement 4) compliant multicore features of Green Hills’ INTEGRITY®-178 Time-Variant Unified Multi-Processing (tuMP) real-time operating system (RTOS). This enables multiple independent safety and/or security-critical applications to execute within the ROCK-2’s multicore operating environment in a predictable, bounded, and application-independent manner. The INTEGRITY-178 tuMP partition-enforcing scheduling mechanism results in a unified RTOS that provides practical time variant scheduling of both asymmetric multiprocessing (AMP) and symmetric multiprocessing (SMP) applications simultaneously, along with the ability to create core affinity groups that define how cores will be utilized by the graphics (and other) applications. The combined software and hardware solution conforms to the Future Airborne Capability Environment (FACE™) V2.1 Technical Standard.[Continue reading →]
Tata Power Company has awarded a contract to Blighter Surveillance Systems and will deploy the Blighter B400 series radars as part of the Indian Government's Comprehensive Integrated Border Management System (CIBMS).[Continue reading →]
ANDOVER, Mass. - Feb. 20, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) announced today that Michelle M. McCarthy has joined the Company as Vice President, Chief Accounting Officer and Controller. Ms. McCarthy, a sixteen-year veteran of corporate finance, will report to Michael Ruppert, Mercury’s Executive Vice President and Chief Financial Officer, and will be responsible for the Company's financial reporting, accounting and tax operations.
"We are delighted to have someone of Michelle's experience and financial acumen join Mercury's management team," said Ruppert. "She has a proven record of success guiding accounting, financial reporting and governance functions in complex global organizations, which will be of great benefit to our Company and shareholders. Additionally, her experience in acquisition due diligence, technical accounting and integration will be very valuable as we seek to continue our record of organic and acquisition-related growth."[Continue reading →]
ANDOVER, Mass. - Feb. 1, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) today announced the completion of its previously reported acquisition of Themis Computer (Themis).
Pursuant to the terms of the merger agreement applicable to the acquisition, Mercury acquired Themis for an all cash purchase price of $180 million, subject to net working capital and net debt adjustments. The acquisition and associated transaction expenses were funded through Mercury’s existing revolving credit facility.[Continue reading →]
Curtiss-Wright announces new VPX3-534 and VPX3-535 3U VPX 6GSPS Wideband Transceiver FPGA Cards ASHBURN, Va. – January 26, 2018 -- Curtiss-Wright’s Defense Solutions division today announced its highest performance 3U OpenVPX™ FPGA-based transceiver cards, with 2x or greater performance compared to Curtiss-Wright's previous generation product (VPX3-530). Leveraging Curtiss-Wright’s industry leading expertise in ruggedization and thermal management, the new VPX3-535 features a user programmable Xilinx Virtex™ VU9 UltraScale+ FPGA to process dual 6Gsps 12b ADC/DAC channels on a single slot module solution with 6GHz bandwidth. Such performance supports wideband direct RF applications. The VPX3-535, Curtiss-Wright’s first publicly announced module to feature full compliance to the VITA 48.8 Air-Flow-Through (AFT) cooling standard, ensures optimal performance in the harshest conditions.
For today’s COTS 3U and 6U VPX modules that dissipate ~150W+, VITA 48.8 provides a low-cost, effective means to cool the latest generation of high power components. In addition, the VPX3-535 supports an option for VITA 67 backplane RF I/O, which eliminates the need to manage front panel cables.[Continue reading →]
Las Vegas, NV, October 31, 2017 - OnTime Networks, a global leader for rugged, time synchronized Ethernet solutions for the aerospace and defense industries, announces the expansion of its military-grade gigabit Ethernet switch and router portfolio with the new CloudberryMIL CR-6900 Series.[Continue reading →]
Lasertel, a Leonardo company, has been awarded a Phase I contract to participate in the Defense Advanced Research Projects Agency’s Efficient Ultra-Compact Laser Integrated Devices program. The EUCLID program aims to greatly reduce the size and weight of laser diode pump sources for fiber lasers used in directed energy applications.
High-energy laser technology has the potential to provide new and enhanced defense capabilities. However, until recently, these systems have been too large and heavy to be widely integrated in military platforms.[Continue reading →]
ANDOVER, Mass. - July 17, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $10.5M follow-on order from a leading defense prime contractor for high-performance microwave transceivers for precision guided munitions. The order was booked in the Company’s fiscal 2017 fourth quarter and is expected to be shipped over the next several quarters.
“Mercury Systems continues to play a key role in supplying advanced state-of-the-art microelectronic based components and subsystems to our prime customers and the United States Government,” said Charlie Leader, Senior Vice President and General Manager of Mercury’s Advanced Microelectronics Solutions group. “This order reflects Mercury’s ongoing commitment to support our customers with high performance, reliable and affordable solutions necessary to protect our nation’s interests around the world.”[Continue reading →]
PicoVNA 106 Network Analyzer from Saelig Saelig Company, Inc. has introduced the Pico Technology PicoVNA 106 Low-Cost Vector Network Analyzer - an economical USB-controlled, professional-grade 300kHz to 6GHz Vector Network Analyzer (VNA) with excellent performance, portability, and affordability. Despite its small size and low cost, its full-function, minimal-error, ‘Quad RX’ four-receiver architecture supports both 8- and 12-term calibration without the uncorrectable switching errors, delays, and unreliability of traditional three-receiver designs. The instrument supports convenient calibration methods such as ‘enhanced isolation correction’ and ‘unknown thru’.
The PicoVNA 106 has a dynamic range of up to 118dB at 10Hz and only 0.005dB RMS trace noise at its maximum bandwidth of 140kHz. It can gather all four S-parameters at just 190usec per frequency point, so a 500 point 2-port S2P Touchstone file (compatible with many test, math, view and EDA simulation tools) is captured in less than 1/10 sec. This performance compares with other full-function VNAs that are more than four times as expensive. The PicoVNA 106 is even cost-effective as a high-dynamic-range scalar network analyzer where phase measurements are not needed, or even as a single-port vector reflectometer. The product also includes bias-Ts for the convenient injection of a bias or test stimulus. The PicoVNA 106 software's two utilities address gain compression (P1dB) and AM to PM. Both of these use a port power sweep at each test frequency, with both measurements extracted using second-order interpolation.[Continue reading →]
PHOENIX, Ariz. - July 13, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received the Premier Supplier Excellence Award from Raytheon. This prestigious award recognizes the Company’s Phoenix, Ariz. Microelectronics Secure Solutions business unit for its operational excellence while delivering advanced microelectronic solutions in support of Raytheon’s business needs. The award was presented by Raytheon executives to Mercury in a ceremony at the Company’s Phoenix facility earlier today.
Premier awards are awarded to Suppliers whom have demonstrated premier achievement for Raytheon in Business Management, Technical, Partnership, or Affordability. Only the highest achieving Suppliers are awarded this honor.[Continue reading →]
PiL's P53 "Steel Head" ultrasonic sensor and mounting kit is an off the shelf, hygienic sensor solution designed for the food and beverage sector and chemical and pharmaceutical industries - suitable for any manufacturing/assembly/bottling/packaging system that requires a clean and hygienic environment. EHEDG (European Hygienic Engineering and Design Group certified. The "Steel Head" P53 sensors and EHEDG-compliant mounting kits make PiL one of the few manufacturers of rugged ultrasonic sensors that are truly suitable for use in applications with demanding hygienic requirements.[Continue reading →]
Leti, a technology research institute at CEA Tech, will host a workshop during SEMICON West 2017, July 11-13, focusing on how microelectronics will influence and address tomorrow's digital and energy challenges.[Continue reading →]
W. L. Gore & Associates, Inc. (Gore) is pleased to announce that COTSWORKS(r) has been recently named an authorized distributor and value-added reseller of GORE(r) Aerospace Fiber Optic Cables for civil and military aircraft applications in Europe and North America.[Continue reading →]
- Leti, a technology research institute of CEA Tech, today announced the world's first wearable stress-monitoring device that enables customized recommendations for stress-free travel and indicators for improving public-transportation safety. Leti scientists will demonstrate this device and a smartphone-based mobility observer developed in the Horizon 2020 Programme at the 12th ITS European Conference in Strasbourg, France, June 19-22.[Continue reading →]
Fujitsu Components America announced a new series of resistive touch panels with dome switches that are fully customizable to meet the needs of specific industrial automation and machine control applications.[Continue reading →]
Based on Nordic's class-leading nRF52832 Bluetooth low energy System-on-Chip (SoC), the development kit incorporates nine different sensors plus a microphone and speaker, and enables app developers to configure, test, and demonstrate Bluetooth low energy IoT devices linked to mobile apps and Cloud platforms without needing RF firmware coding skills or development tools[Continue reading →]
Excelfore, a leading force in smart mobility networks, unveiled the eSync Alliance, a global automotive initiative to drive multi-company solutions for over-the-air (OTA) updates and diagnostic-data in the automotive electronics eco-system.[Continue reading →]
/ins. Machines for shaping 3D components in different work planes. As a result of material development, new and High Tech Industries has a changing need for processing advanced 3D geometry parts. Hardened metals, special alloys and combined materials like composites are setting new requirements on material processing technology. The waterjet cutting process is often preferred for high-tech parts manufacturing, since a cold cutting process eliminates impact on material structure, with no micro cracks or heat affected zones. With a high precision and structured 5-axis machine system Water Jet Sweden has become master of designing machine tools for free form, high precision, water jet cutting in space, fulfilling the most challenging customer demands from leading aerospace, defense, and power industries around the world.[Continue reading →]
AICSYS Inc Industrial Automation Hardware manufacturer launches Fanless LPC-T Series, an elegantly designed waterproof full IP65 compliant 6-sided sealed stainless steel chassis to prevent acid, liquid, and dust from damaging the Panel PC device and offers a sophisticated glossy and shiny surface.[Continue reading →]
Avnet (NYSE: AVT), a leading global technology distributor, and UbiquiOS™ Technology Limited, a leading provider of hardware-agnostic, wireless connectivity software, today announced a new distribution agreement that expands Avnet’s franchise rights with UbiquiOS to include the Americas. Effective immediately, Avnet will offer UbiquiOS’s integrated stack to customers in the Americas as well as Europe, accelerating the development of IoT-enabled devices and systems.
Built on open standards/protocols to support end-to-end IoT applications across a wide array of functions and applications, UbiquiOS is a compact and secure embedded software platform that provides a complete connectivity solution from device driver to application layer. UbiquiOS provides powerful APIs for common system functionalities such as memory management, device configuration and provisioning, and network protocol implementations.[Continue reading →]
Taoglas, a leading provider of automotive, IoT and GNSS antenna products, today announced the launch of Axiom, a reference design for a low-profile, compact multiple-antenna solution for the next generation of Connected Cars.[Continue reading →]
THIEF RIVER FALLS, Minn., June 2, 2017 -- Adafruit Industries, Girls Who Code, and Digi-Key Electronics are excited to announce a special program designed to further STEM education and reduce the gender gap in technology-based careers. The promotion is entitled "Buy a Playground, Give a Playground".
During the summer months, for every Adafruit Circuit Playground that is sold on www.digikey.com, Digi-Key and Adafruit will donate one Circuit Playground to Girls Who Code for use in their education-based programs. [Continue reading →]
ST. LOUIS and CHENNAI, India – April 12, 2017 - e-con Systems Inc., a leading camera solutions company, today announced the launch of See3CAM_CU135, a 4K Custom lens USB 3.0 Camera. See3CAM_CU135 is based on the 1/3.2-inch AR1335, an 1.1 pixel BSI CMOS image sensor from OnSemi™. The See3CAM_CU135 is provided with the S-mount (M12) lens holder that enables customers to choose a lens of their choice. The See3CAM_CU135 streams Ultra HD (3840 x 2160) at 30fps and 4K Cinema (4096 x 2196) @ 30fps over USB 3.0 in compressed MJPEG format. This See3CAM_CU135 streams FULL HD (1920 x 1080) at 60fps and HD (1280 x 720) at 60fps in both uncompressed (UYVY) and compressed MJPEG formats. e-con Systems launched the AR1335 based Autofocus camera See3CAM_130 last year. Now it comes with Standard Mount (M12) Lens option as See3CAM_CU135.
See3CAM_CU135 is ideal for customer applications where high resolution 13MP still images or Ultra HD / HD video are required. With S-mount lens holder, the See3CAM_CU135 is ideal for Medical applications such as digital microscopy, Document Scanning cameras, Optical Character Recognition applications, smart surveillance, smart parking lot management applications, high-resolution Microscopic/Magnification applications, Drones etc. The See3CAM_CU135 also highly suitable for high resolution video streaming, video conferencing and surveillance applications. Its outstanding low light sensitivity, ROI based Auto functions and iHDR feature makes this camera standout compared to other high resolution cameras. [Continue reading →]
The new Skylake PICMG 1.3 CPU card from ICP Deutschland and various backplane variants from a flexible modular system for the development of expandable and compact industrial PC for system control and image processing.[Continue reading →]
Arkville GPP/FPGA Packet Mover IP Solution Arkville Line-Rate Agnostic DPDK/AXI Aware Data Mover. Atomic Rules announces DPDK-aware FPGA/GPP data mover
AUBURN, NH – Atomic Rules, a reconfigurable computing IP firm, is pleased to announce the launch of Arkville, a DPDK-aware FPGA/GPP data mover enabling Linux DPDK applications to offload server cycles to FPGA gates. [Continue reading →]
The Global Image Recognition Market is expected to reach a market size of $ 42,246 million by 2022, growing at a growth rate of 18.0 % during the forecast period. Hardware market would lead the Global Image Recognition market attaining a market share of 50.0% by 2022.[Continue reading →]
/ins.Concept Sweden AB is a young company, but they have many years of experience within the field of automation. Situated in Gothenburg, on the west coasts of Sweden, a group of experienced engineers and young blood in the line started the automation company in 2011. The startup has been very successful with an average growth rate of more than 25% per year. They have had a high annual profitability right from the start, and their new waterjet cutting machine investment has improved profitability even further.[Continue reading →]
Electronics Architecture Evolution Towards Automated Driving
An autonomous car is the main vision of the automotive industry for the next decade. In 2017, many OEMs started implementing intermediate milestones through advanced driver assistance (ADAS) functions to achieve a fully autonomous car. From the industry point of view, realizing the new technology with reasonable costs and reliability is a key requirement for deploying autonomous cars. [Continue reading →]
New Delhi and Aix-en-Provence: Logic Fruit Technologies, one of the world's foremost providers of Design Services & IPs Cores and Accelize, the leading accelerator content provider for FPGA Acceleration-as-a-Service have announced a new strategic partnership. The partnership will combine Logic Fruit’s expertise in Design Services, Video & Security IPs Cores with Accelize’s market leading Cloud workload FPGA acceleration technologies to deliver solutions for today’s increasingly data rich world.
Logic Fruit has joined Accelize’s QuickAlliance™ network, a group of world’s top high-quality IP providers and FPGA accelerator developers, offering their services through Accelize’s QuickStore® for plug-and-play configuration of FPGA accelerators. These accelerators are in turn available in various Cloud Service Providers marketplaces to be sold as a service to their end users.[Continue reading →]
Mercury Systems 4BG_DDR3_High-Density ANDOVER, Mass. - May 4, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced that it has launched production of a highly miniaturized DDR3 memory device perfectly suited for SWaP-sensitive military and commercial aerospace applications demanding 1600 Mb/s data transfer speed. Mercury’s precision-engineered packaging technology now compacts 4GB of double data rate third-generation synchronous dynamic random-access memory (DDR3 SDRAM) in a single 301 mm2 ruggedized package, setting the industry standard for the highest density DDR3 device. The new 4GB DDR3 high density secure memory product, available in x64 and x72 architectures, is manufactured at Mercury’s Advanced Microelectronic Center in Phoenix, Ariz.
Next-generation mission computing and sensor subsystem designs need additional DRAM capacity for simultaneous processing of numerous wideband data streams. While attempting to double or triple the number of discrete DRAM devices, system architects frequently encounter a scarcity of available space for integration of these components. Mercury’s newest memory product surmounts this space restriction by vertically integrating the equivalent of up to five DDR3 memory devices into one densely-packed, low-profile ball grid array (BGA) package less than 2.5 mm thick. Physical footprint reductions up to 59% are realized without compromising the benefits of high-capacity DDR3 memory. For the highest levels of reliability, the integrity of the mechanical and electrical interface to the customer’s subsystem is assured through the selection of a lead alloy solder.[Continue reading →]
Coinciding with the 2018 Winter Games in PyeongChang, Korea, the prototype will be first time state-of-the-art terrestrial wireless communication, including future key enablers such as mmWave access, will be seamlessly combined with disruptive satellite communication. This will form a 5G network with multi-radio-access technologies that is optimized to serve user equipment in various applications.[Continue reading →]
Kaman Measuring Announces ThreadChecker™ for In-Die Use
Noncontact application-specific sensors provide rugged and reliable verification [Continue reading →]
CHELMSFORD, Mass. - Feb. 7, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $4.1 million follow-on order from a leading defense prime contractor for wideband millimeter wave transceivers for a homeland security high-resolution imaging application. The order was booked in the Company’s fiscal 2017 third quarter and is expected to be shipped over the next several quarters.
“This follow-on order confirms Mercury’s leadership position in the design and commercialization of innovative millimeter wave solutions required for high-resolution imaging applications,” said Charlie Leader, Vice President and General Manager of Mercury’s Advanced Microelectronics Solutions Group. “Our Advanced Microelectronics Centers proudly supply these highly miniaturized subsystems critical for the rapid identification of concealed threats in heavily trafficked secure environments.”[Continue reading →]
In order to address the vibrant and constantly expanding maker market, SST Sensing Ltd. has partnered up with Sparkfun. Together they have developed and simple to implement solution for single point liquid detection using infra-red technology. This highly reliable and accurate solution comprises an Optomax Digital liquid level switch which is connected to an Arduino board via the TTL output and powered by its 5V source. LEDs on the Arduino can be easily programmed to indicate if the sensor is/isn’t immersed by the liquid (and thus determine if liquid level is too high/low). Using this hardware, hobbyists are provided with plenty of scope to experiment, while professional engineers have the opportunity to evaluate their prototype before moving on to a full scale design.
The Optomax devices have compact dimensions that allow them to be deployed within environments where there is only limited available space. As relatively long cabling can be supported, the sensor can be placed in close proximity to a liquid without any risk of the accompanying electronics on the Arduino being damaged. Furthermore, as this solution is of an optical rather than a mechanical nature, issues such as the build-up of deposits, jamming, or wear and tear are avoided. A long term operational life span is thereby assured. [Continue reading →]
RadarVision converts radar data into a camera-like data stream for presentation of high fidelity radar on any video management system (VMS) and interfaces to a wide range of security, maritime and specialist military radars.[Continue reading →]
Latest Report on "LiDAR Industry" Contains Market Overview, Product Overview, Scope of Smart Advisers , Application, Market Size, Competition by Manufacturers, Capacity, Production, Revenue, Market Analysis by Application, Manufacturing Cost Analysis, Industrial Chain, Sourcing Strategy, Downstream Buyers & Forecast 2021[Continue reading →]
Dallas, TX January 18, 2017 - OnTime Networks, a global leader for rugged, time synchronized Ethernet solutions for the aerospace and defense industries, announces the expansion of its military-grade gigabit Ethernet switch and router portfolio with the new CloudberryMIL CR-6200 Series.[Continue reading →]
Intersil Corporation today announced the ISL78693, a 3.6V single-cell battery charger that extends the life of Lithium Iron Phosphate (LiFePO4) batteries used in automotive emergency call (eCall) systems. The ISL78693 battery charger offers up to 4x lower leakage current (3uA) than competitive chargers, allowing the eCall backup battery to remain charged for a longer period of time. See a demonstration of the ISL78693 in Intersil’s booth #E30-11 at the Automotive World conference, January 18-20 in Tokyo, Japan.
Automakers worldwide are installing eCall in their Vehicle to Infrastructure (V2I) systems. In the event of a crash, the eCall system automatically broadcasts its location via GPS and contacts the nearest 24-hour emergency call center for help. Thus, V2I eCall systems must be capable of operating reliably and autonomously from the backup battery at a moment’s notice, even if the vehicle is involved in an accident minutes after being parked for several months.[Continue reading →]
The AUDS counter-drone defence system, developed by three British companies - Blighter Surveillance Systems, Chess Dynamics and Enterprise Control Systems - has become the first fully integrated system worldwide to achieve TRL-9 status.[Continue reading →]
Camarillo, CA January 16, 2017: Innovative Integration, a Molex Company and trusted supplier of
signal processing and data acquisition hardware and signal processing solutions, today announced the COPious-PXIe. The 8HP PXIe -compatible plug-in card employs the powerful Xilinx Z7045 (Zynq) system-on-chip processor which provides dual, floating-point, ARM A9 CPUs and a large userprogrammable FPGA fabric.[Continue reading →]
Portwell's PQ7-M108, a Qseven 2.1 module based on Intel Atom Processor E3900 series, Intel Pentium processor N4200, and Intel Celeron processor N3350 (codenamed Apollo Lake), features Infineon OPTIGA Trust IC, industrial temperature support for -40°C to 85°C, and Intel Gen 9 graphics with triple display support in high resolution.[Continue reading →]
CHELMSFORD, Mass. - Jan. 17, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $2.4 million follow-on order from a leading defense prime contractor to supply frequency conversion modules for an Electronic Warfare (EW) service life extension program. The order was booked in the Company’s fiscal 2017 second quarter and is expected to be shipped over the next several quarters.
“This follow-on order further validates Mercury’s leadership position supplying our defense prime contractors with highly integrated and customized RF modules for EW programs,” said Charlie Leader, Vice President and General Manager, Mercury Systems. “Our advanced microelectronics centers are committed to delivering cost-effective EW solutions, enabling our military forces to dominate the electromagnetic spectrum. We are privileged to provide supply chain continuity for vital national defense programs supporting our warfighters around the globe.”[Continue reading →]
PHOENIX, Ariz. – January 17, 2017 – ON Semiconductor (Nasdaq: ON), driving energy efficient innovations, has introduced a new touch/proximity sensing solution that combines industry-leading performance, cost effectiveness and convenience in a single chip. The LC717A30UJ high dynamic range capacitance-to-digital converter uses mutual capacitance to detect changes in capacitance down to femtofarad (fF) levels. Parasitic capacitance cancellation raises the detector sensitivity, while its built-in noise rejection mechanism combats the effects of electromagnetic interference (EMI).
The eight capacitance-sensing input channels make the LC717A30UJ highly optimized for use in systems where an array of switches is required. The device includes an integrated multiplexer for input channel selection, analog-to-digital converter, dual-stage amplifier that determines capacitance changes plus outputs analog amplitude values, system clock, power-on reset circuit, and all the necessary control logic to create a total solution. Both I2C and SPI interfaces are selectable based on the system application needs.[Continue reading →]
Noida, January 12, 2017: KritiKal Solutions, a pioneer in Embedded Systems, IoT, Computer Vision, and Image Processing recently launched a Network Clock with several key features to ensure accurate, synchronized time without any delay.
In the field of Embedded Systems, KritiKal Solutions has been providing a wide range of electronic products and equipment to Government organizations and other large-scale enterprises for over a decade. They have now enhanced their product portfolio with Network Clocks. The Network Clock updates time through GPS time server to avoid any fluctuations or time-shifts, thereby ensuring that everybody is working to the same time. It is easy to set up, maintenance free, and can be configured easily for any specific time-zone and daylight-saving requirements. [Continue reading →]
Moortec Semiconductor, specialists in Process, Voltage and Temperature (PVT) sensors, announce the availability of their Embedded Temperature Sensor on TSMC’s 16nm FF+ and FFC processes.
This latest addition to the temperature sensor range extends Moortec's position as the leading provider of embedded thermal sensors and on-chip monitoring IP to semiconductor customers worldwide. The new TSMC 16FFC/FF+ Embedded Temperature Sensor is a high precision low power junction temperature sensor that has been developed to be embedded into ASIC designs. [Continue reading →]