Signal Processing Applications

News

Source:

ANDOVER, Mass. ∠March 12, 2019 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $2.3 million order from a leading defense prime contractor for advanced GPS Selective Availability Anti-Spoofing Modules (SAASM) devices for a weapons application. The order was booked in the Company’s fiscal 2019 second quarter and is expected to be shipped over the next several quarters.

The Company has successfully commercialized a comprehensive portfolio of microelectronics solutions optimized to address the harsh, SWaP-constrained operating environment typical of weapons applications. [Continue reading →]

In a New Tab/Window

 

Source:

Mercury Systems MRSI-605_Detail.02 ANDOVER, Mass. ∠March 5, 2019 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) announced the defense industry’s first trusted custom microelectronics capability targeting SWaP-constrained intelligent sensors for military applications using the resources of the Company’s Defense Microelectronics Activity (DMEA)-accredited facility in Phoenix, Ariz. for design, assembly and test services. Although the Company provides a broad portfolio of digital microelectronics as standard product offerings, edge processing architectures for intelligent sensor and effector mission systems often require custom microelectronics designs to avoid compromises between SWaP, thermal management considerations and optimized system performance.

While most commercial microelectronics suppliers continue to move design and manufacturing capabilities offshore, the defense industry faces increased challenges for long-term supply continuity of trusted microelectronics critical to the success of our military forces. This increases the risk of device alteration by adversaries from the earliest stages of product design through the end of full rate production. Mercury’s custom microelectronics capability mitigates this risk by providing customers with a domestic and assured chain of custody deeply integrated throughout the entire product lifecycle, starting with the initial conceptual design, for both classified and unclassified programs. [Continue reading →]

In a New Tab/Window

News

Source:

ANDOVER, Mass. ∠Feb. 21, 2019 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $3.1 million follow-on order from a leading defense prime contractor for rugged system-in-package (SiP) devices embedding a processor and memory devices in a single, SWaP-optimized package. The order was booked in the Company’s fiscal 2019 second quarter and is expected to be shipped over the next several quarters.

Mercury offers a comprehensive portfolio of microelectronics optimized for weapons applications, spanning both the radio frequency (RF) and digital domains. For assured long-term supply continuity of mission-critical technologies for the U.S. warfighter, the Company has established three Advanced Microelectronics Centers (AMC) located in close proximity to major customers. With design engineering and scalable manufacturing resources housed in the same facility, these AMC facilities deliver precision-engineered microelectronics in high volume production without sacrificing affordability. [Continue reading →]

In a New Tab/Window

News

Source:

ANDOVER, Mass. ∠Jan. 17, 2019 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) announced it received a $7 million order from a leading defense prime contractor for rugged servers to be used in an on-the-move tactical communications application. The order was booked in the Company's fiscal 2019 second quarter.

Mercury’s EnterpriseSeries™ servers are successfully deployed in a broad range of C4ISR applications. Designed from the ground up for mission-critical applications where performance, reliability, and uptime are crucial, Mercury’s servers feature leading-edge components while providing superior resilience to shock, vibration, and temperature extremes.[Continue reading →]

In a New Tab/Window

 

Source:

Mercury's broad portfolio of SWaP-optimized RF and microwave solutions include high frequency amplifiers, filters, integrated microwave assemblies and precision-engineered subsystems ruggedized for unpredictable, harsh operating environments.[Continue reading →]

In a New Tab/Window

 

Source:

Mercury Systems' design win is for advanced, safety certifiable flight controllers from an international aerospace company with an anticipated lifetime value of $40 million over the ten-year period of the contract.[Continue reading →]

In a New Tab/Window

News

Source:

Blighter Surveillance Systems Ltd (www.blighter.com), a British designer and manufacturer of electronic-scanning (e-scan) radars and surveillance solutions, is targeting further expansion into Korea with the appointment of S-Connect, in Seoul, as its local manufacturing partner (www.s-connect.co.kr).

S-Connect is a leading manufacturer of precision assemblies and electronics for the mobile phone, tablet PC and medical devices markets. Following intense training in the UK and in Korea, S-Connect is now fully qualified to build, test, support and maintain Blighter e-scan radars. The partnership has also led to the establishment by S-Connect of a new, dedicated radar manufacturing and support facility at Jeongok, southwest of Seoul. [Continue reading →]

In a New Tab/Window

 

Source:

Laser testing at IAP offices Unloading of the mobile LIDAR onto the fast ice in front of the Australian Antarctic station Davis (69° S) from the ice breaker \"Aurora Australis\" Grosshansdorf, Germany - 12. December 2018. Atmospheric research uses pulsed laser beams to measure temperature and wind speed along the beams by measuring the Doppler shifted and backscattered light at 100 km height in the atmosphere. The returning light signals are very weak and can be blocked by sunlight, but The Leibniz Institute for Atmospheric Physics (IAP) has solved this problem: they developed the world's only portable instrument that can be used during the daytime and it has already provided new insights into Antarctic atmospheric conditions. This new generation of compact and reliable systems uses a novel, diode-pumped laser and, at its heart, are a Spectrum Instrumentation Arbitrary Waveform Generator (AWG) and two Digitizers that provide the extremely high speed, sensitivity and real-time capability required.

The measuring technique is called Doppler resonance LIDAR as the light is backscattered by tuning the laser precisely to a resonance transition of a metal atom. The backscattered signals are extremely weak (single photons per laser pulse) and are almost completely drowned out by solar radiation during the day. The difference between night and day measurements is that there is 100,000,000 times more background noise during the day from the sun.[Continue reading →]

In a New Tab/Window

 

The LightVISION VM is a screw-in, robust, industrial and RoHS optical module with MPO interface. The LightVISION VM acts like a QSFP+ but offers reduced dimensions and power consumption, and industrial temperature range. Reflex Photonics is proud to launch the LightVISION™ MPO compatible rugged optical transceiver for data gathering vehicle fleets for AI training of future self-driving car applications.

The global automotive industry advances rapidly toward fully autonomous (Level 5) vehicles. Today, many competing data gathering fleets of vehicles are logging millions of km on the roads of the world in order to amass the data required to feed and train the AI that will enable full vehicle autonomy. The detection accuracy and the size of the dataset demanded by those safety-critical training systems is very high, as is the bandwidth, performance, and reliability of the high-speed links providing the data collecting backbone of these vehicles.[Continue reading →]

In a New Tab/Window

News

Source:

ANDOVER, Mass. ∠Nov. 28, 2018 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) announced that it received a $2.1 million order from a leading global distributor of electronic components for SWaP-optimized memory devices featuring BuiltSECURE™ technology for a European defense application. The order was booked in the Company’s fiscal 2019 first quarter and is expected to be shipped over the next several quarters.

BuiltSECURE memory devices leverage the Company’s deep domain expertise in three-dimensional packaging technology. By transforming a two-dimensional array of memory devices into a single, vertically-integrated memory module, BuiltSECURE memory devices offer the ruggedization levels required to withstand the harshest military operating environments. All of the Company’s digital microelectronics are designed and manufactured in the Company’s Advanced Microelectronics Center (AMC) in Phoenix, Ariz. [Continue reading →]

In a New Tab/Window

 

Source:

ANDOVER, Mass. ∠Nov. 27, 2018 ∠Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced that Barry R. Nearhos, a retired partner at PricewaterhouseCoopers (“PwC”), was elected to the Board of Directors and appointed to the Audit Committee of the Board of Directors. With this election, the Board will consist of nine members, eight of which are independent directors.

“We are very pleased to announce that Barry has joined the Board of Directors, where his expertise will be a key asset,” said Mark Aslett, Mercury's President and Chief Executive Officer. “Barry has a rich history of providing global corporations with audit and assurance services along with strategic business advice on M&A, corporate governance, and finance matters and we look forward to benefitting from his extensive expertise as we continue to execute against our business objectives and take action to create value for our shareholders.”[Continue reading →]

In a New Tab/Window

 

Source:

Mercury received a follow-on order from a leading defense prime contractor for custom-engineered, high-performance subsystems with integrated RF and digital microelectronics for a naval EW application.[Continue reading →]

In a New Tab/Window

 

Source:

Cambridge Pixel's RadarWatch display application and tracking software improves safety at UK firing ranges by providing an integrated radar video and AIS track display, as well as advanced alarm capability for targets entering user-defined danger zones.[Continue reading →]

In a New Tab/Window

 

Source:

ANDOVER, Mass. - Nov. 15, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) confirmed that it has been awarded a multi-year contract from a leading aircraft manufacturer for c The mission computers will execute command and control (C2) functions for various airborne missions and platforms, and will be certified to DAL-A, the highest level of flight safety. Safety certification will include multicore and multiprocessor mission computer configurations.

“The design win solidifies a partnership of strategic importance that enables Mercury and our customer to work closely together in a low-risk environment,” said Ike Song, Mercury’s Vice President and General Manager for Mercury Mission Systems. “Our customer differentiated their C2’s solution capabilities by leveraging Mercury’s mission computing and safety certification expertise and our powerful ROCK-2 safety-certifiable compute solutions.”[Continue reading →]

In a New Tab/Window

Article

Military intelligence, surveillance, and reconnaissance (ISR) applications continue to make demands on signal-processing designers for more performance, better thermal management, and reduced size, weight, and power (SWaP). These systems - as they move closer to the sensor on various platforms - are also starting to enable artificial intelligence (AI) solutions at the edge.[Continue reading →]

In a New Tab/Window

News

Source:

ANDOVER, Mass. - June 26, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received $5.9 million in orders from a leading defense prime contractor for the development of small form factor electronic warfare modules for a defense application. The orders were booked in the Company’s fiscal 2018 fourth quarter.

The Company offers a broad portfolio of electronic warfare solutions for ground, naval, and airborne platforms. Mercury’s highly skilled engineering team has developed advanced design and simulation tools enabling rapid prototyping of new designs with a seamless transition to volume production. The Company’s highly automated manufacturing facilities consistently deliver high-quality microelectronics innovations optimized for size, weight and power without sacrificing performance or affordability.[Continue reading →]

In a New Tab/Window

 

Source:

BOSTON, Mass. - June 26, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com) announced it received the 2018 Premier Supplier Excellence Award from Raytheon. This prestigious award recognizes the Company for demonstrating premier achievement in the area of partnership and for its operational excellence delivering advanced microelectronic solutions in support of Raytheon’s business needs. The award was presented by Raytheon executives to Mercury in a ceremony at the Boston Marriott Long Wharf yesterday.

Premier awards are awarded to suppliers who demonstrate premier achievement for Raytheon in the area of affordability, technical, business management or partnership. Only the highest achieving suppliers are awarded this honor.[Continue reading →]

In a New Tab/Window

 

Source:

ANDOVER, Mass. - June 20, 2018 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received $3.2 million in follow-on orders from a leading defense prime contractor for custom-engineered digital microelectronics for a precision guided munitions application. The orders were booked in the Company’s fiscal 2018 fourth quarter and are expected to be shipped over the next several quarters.

Mercury offers a best-in-class microelectronics product portfolio for weapons applications spanning both the analog and digital domains. This extensive product portfolio includes selective availability anti-spoofing modules (SAASM), GPS filter amplifiers, miniature radio frequency (RF) transceivers, high density secure memory, secure solid-state storage devices (SSD) and BuiltSECURE™ system-in-package (SiP) devices with embedded security. All of these products have been precision-engineered to achieve the stringent size, weight, power and performance specifications required for the most advanced missile and munition programs. [Continue reading →]

In a New Tab/Window

Article

The VPX form factor is used today for a wide range of applications and deployed environments. Applications vary from rail management systems to active electronically scanned array (AESA) radars on high-performance fighter aircraft, and environments vary from lab-benign (or near-lab conditions like wide-body jets) to tracked vehicles and unpressurized bays in high-altitude unmanned aerial vehicles (UAVs). The ruggedness and huge bandwidth provided by VPX make it a natural choice for many projects. However, one application space that benefits more than most from the processing power of VPX is electronic warfare (EW) and military sensor processing (SP) systems.[Continue reading →]

In a New Tab/Window

News

The LightVISION has been especially designed for data intensive imaging and machine vision applications. Reflex Photonics will proudly launch its new LightVISION industrial embedded optical transceiver solution at the upcoming SPIE Photonics West 2018 exhibition.

The innovative LightVISION is a compact, screw-in, robust, industrial, and RoHS embedded parallel optical module that offers superior performance to current optical interconnect technologies such as QSFP+ and QSFP28.[Continue reading →]

In a New Tab/Window

Article

Radar, communications, and SIGINT [signals intelligence] systems have traditionally combined sensor processing, data conversion, and signal processing hardware within single enclosures or equipment racks. Analog signals for antennas, transducers and other sensors were connected through cables, often causing loss and interference along the way. However, enabled by new data converter and field-programmable gate array (FPGA) technology and evolving open embedded computing standards, system designers can now deploy small-form-factor (SFF) subsystems at each sensor site for distributed signal acquisition and preprocessing. Digitized signals are then delivered through optical cables, providing higher signal quality over longer connection distances while reducing size, weight, cost, and maintenance.[Continue reading →]

In a New Tab/Window

Article

To solve tough problems like synthetic aperture radar, sensor fusion, and target recognition processing, the military wants and needs performance. That requirement means getting the fastest throughput in the smallest package with the lowest power penalty. The hunger for performance is even more true for autonomous platforms - from aircraft to ground vehicles - that require high-bandwidth processing to "think" for themselves and act on their own, as well as to perform basic sensor and mission processing, self-protection, and communications and navigation functions.[Continue reading →]

In a New Tab/Window

News

Reflex Photonics launches new SNAP12 120G optical transceiver modules targeting advanced manufacturing, industrial automation, and machine vision markets. The operation temperature now ranges from −40 ºC to 95 ºC.[Continue reading →]

In a New Tab/Window

 

Source:

Andover, Mass - July 20, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received a $6.3M order from a leading defense prime contractor for radar processing products. The order includes solutions for multiple surveillance programs and platforms ranging from high-altitude reconnaissance to maritime surveillance in both manned and unmanned aircraft. The order was booked in the Company’s fiscal 2017 fourth quarter and will be shipped over the next several quarters.

The radar processing solutions provided are standard 6U form factor products based on open systems architectures (OSA) that enable affordable reuse of technology across multiple platforms. The technologies provided include high-performance CPU and FPGA processing, digital receiver exciters (DREX), I/O modules, and switch fabric interconnect.[Continue reading →]

In a New Tab/Window

News

BlueBrain(r) Sensor-Based System is a development platform, breakout board and interface board for high-performance IoT applications that allows designers to easily create a wireless monitoring and data collection system via Bluetooth(r).[Continue reading →]

In a New Tab/Window

 

Source:

Marie-Noëlle Semeria, Leti CEO, and Hubert Lakner, Fraunhofer Group for Microelectronics Chairman. Photo credit: Pierre Jayet Leti 50th anniversary logo GRENOBLE, France – June 28, 2017 – Two leading European research institutes today announced their new collaboration to develop innovative, next-generation microelectronics technologies to spur innovation in their countries and strengthen European strategic and economic sovereignty.

Leti, a research institute of CEA Tech in Grenoble, France, and the Berlin-based Fraunhofer Group for Microelectronics, Europe’s largest R&D provider of smart systems, will initially focus on extending CMOS and More-than-Moore technologies to enable next-generation components for applications in the Internet of Things, augmented reality, automotive, health, aeronautics and other sectors, as well as systems to support French and German industries. [Continue reading →]

In a New Tab/Window

 

Source:

Mercury Systems, Inc. announced it received $8.3M in follow-on orders from a leading defense prime contractor for computing modules to be used in airborne and ground-based secure communication subsystems.[Continue reading →]

In a New Tab/Window

 

Source:

ANDOVER, Mass - June 21, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced it received $8.3M in follow-on orders from a leading defense prime contractor for computing modules to be used in airborne and ground-based secure communication subsystems. The orders were booked in the Company’s fiscal 2017 fourth quarter and are expected to be shipped over the next several quarters.

“With our collaborative engineering engagement, we were able to provide unique value to our customer while maintaining an open system architecture,” said Ian Dunn, Mercury’s Vice President of Sensor and Mission Processing. “These follow-on orders are a testament to the high quality and on-time delivery performance of our solutions.”[Continue reading →]

In a New Tab/Window

 

Source:

Tampa, Florida June 20, 2017. Core Avionics & Industrial Inc. (“CoreAVI”) and HENSOLDT Sensors GmbH (“HENSOLDT”) have announced the world’s first RTCA DO-178C and EUROCAE ED-12C safety certifiable 4K video output hosted on HENSOLDT’s RTCA DO-254 and EUROCAE ED-80 safety certifiable Mission Computer. This continues the long relationship between CoreAVI and HENSOLDT to provide innovative and cost effective graphics and video processing solutions for safety critical applications such as synthetic vision systems (SVS).

This solution enables system integrators and end-users to leverage the high-resolution imagery provided by aircraft-installed sensors and available databases as well as large area displays to be installed in future aviation cockpits. Thus, the HENSOLDT Mission Computer with CoreAVI graphics drivers is already supporting the requirements of tomorrow’s avionic architectures.[Continue reading →]

In a New Tab/Window

News

Source:

AICSYS Inc. Panel PC of LPC-153T, LPC-173T, and LPC-193T integrated with Fanless Intel Bay Trail D-J1900 on board, Memory up to (1) 8GB for DDR3L SO-DIMM, (1) 2.5" SATA drive bay, and (1) Mini PCIe slot for expansion. Along with integrated Audio and the high quality LED backlight with resistive touchscreen. Standard external I/O connectors are (2) RS-232, (1) GbE LAN, and (1) USB connectors. These external I/O connectors are configurable per request. It also come with external full range AC adaptor and optional add-on such as RFID sensor and WiFi as selective choices.[Continue reading →]

In a New Tab/Window

 

The Global Image Recognition Market is expected to reach a market size of $ 42,246 million by 2022, growing at a growth rate of 18.0 % during the forecast period. Hardware market would lead the Global Image Recognition market attaining a market share of 50.0% by 2022.[Continue reading →]

In a New Tab/Window

News

Extreme Engineering Solutions (X-ES) is pleased to offer X-ES Enterprise Linux (XEL) - a Board Support Package (BSP) that enables the use of an Enterprise Linux distribution in conjunction with X-ES rugged, embedded computing hardware.[Continue reading →]

In a New Tab/Window

 

The BACnet Explorer NG is the industry's first cloud-connected network discovery and management solution for BACnet networks. BACnet is an industry-standard protocol that is widely used in building and facility automation. The BACnet Explorer NG enables integrators, facility managers, and the OEMs' installation channels to conveniently commission new devices into existing BACnet networks. Progressive solution providers can also leverage the BACnet Explorer NG and FieldPoP device cloud to provide a range of new services to their clients such as continuous facility monitoring and maintenance-as-a-service. This is the BACnet Discovery tool every network and system installer/technician and facility manager needs and wants.[Continue reading →]

In a New Tab/Window

 

Portwell's XM-1, the first IoT gateway to feature international patents of highly composable structure, satisfies customers' requests for an IoT gateway solution that can meet the requirements emerging from an extensive range of IoT applications. And the Portwell DS-1 wireless sensor node series features support for Arduino IDE and a wide variety of options for sensors and wireless connectivity.[Continue reading →]

In a New Tab/Window

 

Source:

Powered by Intel(r) Xeon(r)/Core(tm) i7 (Kaby Lake) processor running with NVIDIA GeForce(r) GTX 1050 graphics engine, advanced NVIDIA Pascal(tm) GPU architecture supporting 8K resolution & CUDA applications, up to 6 independent HD displays, all-in-one integrated features, multiple I/O connection, workstation-grade system performance, mobile availability, smart manageability, wide range power input, surge protection, ignition power control, smart battery protection, isolated DIO, EN50155 and industrial-grade reliability, Vecow ECS GTX1050 Series GPU Computing System is your great solution for any performance driven Industry 4.0/IIoT applications.[Continue reading →]

In a New Tab/Window

 

Source:

The MEMSIC product line at Mouser Electronics features a variety of sensor products, including magnetic and e-compass products, accelerometers, 6-degree-of-freedom (DOF) and 9-DOF inertial measurement units (IMUs) and orientation sensors, and gas flow modules. The MEMSIC product line enables mobility and the Internet of Things (IOT) by combining all the essential elements for engineers' application needs, including solutions for drones, mobile, wearable, industrial, medical and smart parking applications.[Continue reading →]

In a New Tab/Window

 

Source:

COMMELL has released two new embedded boards LP-177 Pico-ITX 2.5-inch and LE-37F 3.5-inch Miniboard with Intel the latest low-power quad-core Pentium processor or dual-core Celeron processor[Continue reading →]

In a New Tab/Window

 

Source:

ST. LOUIS and CHENNAI, India – April 12, 2017 - e-con Systems Inc., a leading embedded camera solution company, today announced the launch of See3CAM_81, an 8 megapixel Autofocus USB 3.0 camera. See3CAM_81 is based on the 1/3.2-inch OV8865, an 8 MP CMOS image sensor from OmniVision. See3CAM_81 is a successor to e-con Systems’ hugely successful 8MP autofocus USB 3.0 camera, See3CAM_80 based on OV8825.

The See3CAM_81 streams uncompressed video 720p@60fps (HD), 1080p@30fps (cropped) and 8 MP@ 11 fps in YUY2 formats over USB 3.0 interface. See3CAM_81 features high performance Image signal processor (ISP) that provides superior high and low-light images, making this camera ideal for customers designing kiosk, multimedia applications, high resolution OCR, barcode scanning applications and medical and scientific applications such as tissue vision, pathology examination and microscopic applications[Continue reading →]

In a New Tab/Window

 

Source:

CAMBRIDGE, United Kingdom, 12th April 2017: UltraSoC and Moortec Semiconductor today announced that they are cooperating on system-on-chip (SoC) monitoring and analytics intellectual property (IP) to enable a new generation of Process, Voltage and Temperature (PVT) sensor sub-systems.[Continue reading →]

In a New Tab/Window

 

Despite the turbulence in the embedded systems industry, it does not fail to deliver technologically advanced products and drive innovation. Its applications are growing in virtually every industry as new technologies experience disruptive advances. The trend is moving toward secured systems that offer high performance and take less development time. Though this seems to be a challenge, manufacturers are taking necessary steps to hit the roof with their vision.[Continue reading →]

In a New Tab/Window

 

Neousys Technology today launched Nuvis-5306RT series featuring Intel(r) 6th Gen Core(tm) i7/i5 processor paired with Intel(r) Q170 Platform Controller Hub. It is the world's first fully featured machine vision controller in a compact footprint that integrates exceptional computing power, built-in camera interfaces and real-time vision-specific I/O controls.[Continue reading →]

In a New Tab/Window

 

Source:

April 5, 2017 – Taipei, Taiwan – To meet the ever growing demands of the embedded and industrial storage market, Innodisk is launching the 3IE4 series with integrated Marvell controllers. Running on Innodisk’s proprietary iSLC technology, it provides performance equal to that of SLC at a much lower cost. The iSLC technology in combination with integrated LDPC error correcting code ensures an extended lifespan; upward to seven times that of standard MLC products.

Traditional MLC flash boasts high capacity, but often falls short with regards to product lifespan. SLC is a better choice for performance and longevity; however the cost is comparatively high. This is where iSLC comes in as a golden mean with a drastic increase in lifespan compared to MLC products, while sporting SLC like performance at a much lower price. This makes iSLC SSDs the perfect choice for industrial and embedded applications where MLC often do not meet longevity demands and SLC are seen as too costly.[Continue reading →]

In a New Tab/Window

 

Source:

MIPI CSI-2 v2.0 Brings Advanced Imaging Features and Capabilities for Applications on Multiple Platforms -- From Mobile Devices to IoT, Wearables, Medical Devices, Drones and Automotive Systems[Continue reading →]

In a New Tab/Window

News

Product description:

WAYJUN two wires 4-20mA temperature transmitters are widely used in Pt100/PT1000/PT10/Cu50/Cu100 temperature sensor isolated and transmit, in industry mainly used for measuring the temperature of -200 ~ +600 Deg.C. The transmitter has linear and long-term compensation, the factory in accordance with national standard Pt100 indexing table calibration, fully meets 0.2accuracy. Input, output, and auxiliary power supply is completely isolated (three isolation), can withstand 2500VDC isolation voltage. Products using international standards for rail mounting DIN35, small size, high precision, stable performance, cost-effective, can be widely used in petroleum, chemical, power, instrumentation and industrial control industries.[Continue reading →]

In a New Tab/Window

 

As technology gets better, system requirements tend to be more complex. Even when quality of commercial devices increases every year, timelines and cost demands stay the same. Allocating the right resources to these projects while not sacrificing product requirements becomes tricky. Inforce 6640™ delivers a complete, product-ready solution for the most advanced and complex product requirements.

Adding support for peripherals like a touch display, a high-end camera, or Power over Ethernet becomes a pesky chore especially if you don’t have the expertise. This SBC, Inforce 6640™, becomes one of Inforce Computing’s most decorated boards with multiple standard, plug and play accessories. Drivers and tuning are taken care of so you can focus on what you care about most: your product.[Continue reading →]

In a New Tab/Window

 

Source:

ANDOVER, Mass. - March 20, 2017 - Mercury Systems, Inc. (NASDAQ: MRCY, www.mrcy.com), announced that it received a follow-on five year sole source basic ordering agreement (BOA) from the U.S. Navy to deliver advanced Digital RF Memory (DRFM) subsystems supporting jamming in a multi-threat environment. Valued at up to $153M, the order was received in the Company's fiscal 2017 third quarter and provides for research and development, production, engineering services and ongoing support. Work will be performed at the Company’s Cypress, Calif. facility with a period of performance from March, 2017 through February, 2022.

“This award showcases Mercury's ability to deliver open standards-based, leading-edge DRFM subsystems that bring real value to our customer and ultimately, the warfighter,” said Brian Perry, President of Mercury Defense Systems. “Our DRFM solutions have been used for over three decades for training and radar environment simulation, vulnerability assessment and self-protection. We take our role in safeguarding our airborne warfighters seriously, especially in today’s environment where advanced threats can come from a wide variety of sources.”[Continue reading →]

In a New Tab/Window

 

Source:

NUREMBURG, GERMANY, March 15, 2017 — Greenwave Systems, Inc. the global managed services and Internet of Things (IoT) software leader, announced a collaboration with Wind River® to deliver its AXON Predict™ engine for Wind River’s VxWorks® real-time operating system (RTOS) developer community. By leveraging AXON Predict, developers will be able to capitalize on a valuable market opportunity with a customized analytics solution that adds computational power and real-time intelligence throughout Industrial IoT (IIoT) segments. It extends analytics and machine learning capabilities down to the chip level — and at all points in between.

“We sought to give VxWorks developers a tool with the prowess to analyze and autonomously respond to high-volume streaming sensor data at the source; our partnership with Greenwave will enable us to do just that,” said Michel Genard, general manager of operating system platforms, Wind River. “AXON Predict will provide developers with embedded analytics that learn patterns, provide insights and take actions inside connected device operations and behaviors. We’re very pleased to be working with Greenwave to offer a compelling solution to advance IIoT.” [Continue reading →]

In a New Tab/Window

 

Source:

SensiNact is a unified framework for integrating and managing IoT devices via generic application programming interfaces (APIs). It enables the collection, aggregation and secure scripting of data from a wide range of communicating objects, regardless of the network communication protocol: LoRa, Sigfox, EnOcean, CoAP, HTTP, MQTT, XMPP, etc.[Continue reading →]

In a New Tab/Window

 Expand All