*40Gb Ethernet, Serial FPDP and LVDS digital input options *Real-time aggregate recording rates up to 4 GB/s *SSD RAID storage capacity up to 30.6 TB using NTFS files *Small form factor 17 pound chassis[Continue reading →]
WASHINGTON. Funding requested for Department of Defense (DoD) Major Defense Acquisition Programs (MDAPs) for Fiscal Year (FY) 2019 totals $92.4 billion, accounting for 33 percent of the Trump administration's Procurement and Research, Development, Test, and Evaluation (RDTandE) funding request for the Department of Defense (DoD) of $236.7 billion. Included below are updates on programs such as the F-35, the B-21 Bomber, the RQ-4 Global Hawk, the CVN 78 Gerald R. Ford aircraft carrier, the Virginia Class submarine, the Joint Light Tactical Vehicle (JLTV), and more.[Continue reading →]
Software Testing harnessing the power of Asperger\\\'s Syndrome & HFA (EMAILWIRE.COM) HIGHLAND PARK, IL -- The public is invited to join Aspiritech (www.aspiritech.org) for an Open House and Ribbon Cutting in Chicago on April 29, 2018, at their newest office at 550 West Van Buren Street, Suite 300 from 2:00 to 4:00 p.m. This expansion was made possible through a generous grant from The Harry and Jeanette Weinberg Foundation.
Ambassador Fay Hartog-Levin (ret.), Weinberg Foundation Trustee, will officially cut the ribbon to kick off the celebration. In addition to the ribbon cutting ceremony and presentations, there will be opportunities to meet the staff and tour the facility. Refreshments will be served. To reserve your spot, please RSVP to firstname.lastname@example.org.[Continue reading →]
*Four 200 MHz, 16-bit A/Ds *Four wideband FPGA-based Digital Down Converters (DDCs) *32 narrowband FPGA-based DDCs *XMC (VITA 42) with PCIe Gen 3 interface *Jade Architecture with Xilinx Kintex UltraScale FPGA *Navigator Design Suite for streamlined IP development[Continue reading →]
Funding requested for Department of Defense (DoD) Major Defense Acquisition Programs (MDAPs) for Fiscal Year (FY) 2018 totals $94.9 billion, more than $17 billion dollars over the FY 2017 request, making up 46 percent of the Trump administration's $208.6 billion FY 2018 acquisition budget request.[Continue reading →]
The DAPtools for Python software from Microstar Laboratories enables intensive data acquisition from Python applications on desktop GNU/Linux systems. Operations with strict time constraints are delegated to the embedded DAPL environment, running on a Data Acquisition Processor board, while less time sensitive data management and display features run in parallel under the Linux kernel. DAPtools for Python is included in the DAPtools Basic package, provided with each DAP product at no added cost. This combines the best of both worlds: the regularity and precision of DAP systems, the flexibility and versatility of the Python environment.[Continue reading →]
Thanks to its proven reliability, cost-effectiveness and size, weight, and power (SWaP) optimization, commercial off-the-shelf (COTS) equipment is becoming increasingly attractive to system designers for use in space applications. As COTS equipment extends into mission-critical functions, the risks to the COTS electronics posed by space radiation need to be understood and mitigated.[Continue reading →]
IoT Reference Platform, from embedded systems experts Abelon Systems, is Bluetooth 5 - ready
The Internet of Things (IoT) is the inter - networking of devices embedded with electronics (including sensors, actuators and network connectivity) and software that enables those devices to collect and exchange data. According to Gartner there will be nearly 21 billion devices on the IoT by 2020. [Continue reading →]
Softing has announced that the latest version of the echocollect gateway includes support for the MQTT protocol integrating process data from systems and machinery into cloud solutions to help customers optimize their facilities[Continue reading →]
Electro Standards Laboratories (ESL), Cranston, RI, introduces QuickSwitch® Model 6316 to its line-up of Fiber Optic Switches. The Model 6316 is a Single Channel LC Simplex A/B Switch that allows the sharing of a single port interface device among two other devices. This fiber switch adds flexibility to IT platforms and networks and is ideal for switching data to multiple displays, billboards and signs.
The Model 6316 features all fiber signals that are switched via break-before-make MEMS-based mirror/prism switch technology and supports Gigabit data rates. The LC Simplex ports are comprised of Single mode, 9/125 micron fiber and support a wavelength of 1310 nm &1500 nm. The switch ports are transparent to all data with optical data throughput scalability.[Continue reading →]
Carrier Grade eXpress (CGX) IoT profile provides new advanced features for connectivity, reliability and security
NUREMBERG, Germany, March 14, 2017 -- Embedded World -- MontaVista® Software, LLC, a leader in Embedded Linux® commercialization products and services, today announced availability of MontaVista® CGX IoT, a modular and standards-based solution that delivers connectivity, reliability, and security that are required for IoT Gateway manufacturers. MontaVista is showcasing MontaVista's "Smart IoT Gateway" design demonstration in Hall 3, Stand 3-225 (co-located with Future Electronics) during Embedded World, Nuremberg, Germany.[Continue reading →]
Carrier Grade eXpress (CGX) IoT profile provides new advanced features for connectivity, reliability and security
UREMBERG, Germany, March 14, 2017 -- Embedded World -- MontaVista® Software, LLC, a leader in Embedded Linux® commercialization products and services, today announced availability of MontaVista® CGX IoT, a modular and standards-based solution that delivers connectivity, reliability, and security that are required for IoT Gateway manufacturers. MontaVista is showcasing MontaVista's "Smart IoT Gateway" design demonstration in Hall 3, Stand 3-225 (co-located with Future Electronics) during Embedded World, Nuremberg, Germany.[Continue reading →]
Core Avionics & Industrial Inc. (CoreAVI) and NXP Semiconductors N.V. announce today that they have reached agreement for CoreAVI to sell and support the S32V234 product family globally for safety critical display applications. This support includes providing the highest levels of safety critical graphics drivers, safety certification data packages and evaluation boards for avionics and industrial applications.[Continue reading →]
The Teledyne LeCroy HVFO103 is a high voltage fiber-optically isolated 60MHz oscilloscope probe that is optimally designed for the measurement of small signals floating on a high voltage bus[Continue reading →]
The single chip THCV241-Q integrates the MIPI CSI-2 interface with THine's well established V-by-One(r) HS product family. The new THCV241-Q is optimized for advanced camera requirements including: - High definition support (e.g., 1080p60, 4K2K) - Uncompressed real-time, zero latency video transmission - 50x increase in maximum transmission distance - from 30cm to 15m - 360 degree rotation at an affordable price point - Lower BOM cost - Smaller circuit boards for more compact designs, new product form factors and higher reliability[Continue reading →]
Designers can now easily develop high-performance fitness and medical wearable devices with enhanced functionality using the MAX32630 and MAX32631 ARM® Cortex®-M4F microcontrollers from Maxim Integrated Products, Inc. (NASDAQ: MXIM).
• More information about MAX32630: bit.ly/MAX32630[Continue reading →]
CPC310 is suggested to be used in building real-time onboard high-speed data acquisition systems.
The module has a standard PC/104-Plus implementation and is developed in consideration of the future replacement for CPC304, providing the easiest possible transition to the new device for our customers.[Continue reading →]
Barcelona, 9 September 2016. On 25, 26 and 27 October 2016, the Catalan capital will be hosting the second edition of the world’s biggest congress on Internet of Things technologies and processes for industrial use: IoT Solutions World Congress (IoT SWC).
The rapid evolution of emerging trends in sensors, networks and data analysis systems, along with the dizzying figures relating to the thousands of millions of ‘things’ which, according to analysts, will be connected to the internet within just a few years, is leading to the emergence of disruptive technologies that can rapidly connect IoT solutions and applications in productive environments.[Continue reading →]
Dataforth has added two new modules to the MAQ20 Industrial Data Acquisition & Control System. The MAQ20-BRDG1 strain gage module offers 4 input channels and can interface to full, half, and quarter bridge sensors using 4-wire or 6-wire connections. The MAQ20 frequency input module accepts zero-crossing and TTL signals with frequencies from 1Hz to 1MHz plus State Change and provides a DC stimulus for contact sensors. All channels in both modules are individually configurable. According to Robert Smith, VP of Sales & Marketing, these additions "significantly enhance the MAQ20's overall excellence and ability to meet customer requirements."[Continue reading →]
The Logical Company today announces NuVAX 1200 and NuPDP 1200, state-of-the-art single-board replacements for legacy VAX and PDP systems. Packaged with a new processor, memory and hard drives, Logical's embedded board design allows users to "drop a new engine" into existing Qbus chassis. Legacy software applications and specialized Qbus equipment will operate without disruption with the affordable new 1200 versions of NuVAX and NuPDP.[Continue reading →]
Bohemia, New York (August 2016) Data Device Corporation (DDC) introduces a new Secure 1U Dual Server (BU-67127W), combined with Tresys’ industry leading secure filtering software, to provide an innovative approach to solving cross domain information transfer problems, that delivers unmatched flexibility, red/black hardware separation, and high performance at a low cost. Its secure yet flexible hardware architecture enables system integrators to easily develop secure information sharing applications to meet the unique requirements of their most advanced systems.
Benefits: [Continue reading →]
RFEL\'s DVE camera RFEL\'s digital video fusion in action Newport, Isle of Wight, UK - 22 August 2016 - RFEL will be announcing a new, HD-SDI and Generic Vehicle Architecture (GVA) compliant military driver vision aid at DVD 2016: Zone C3 Stand 515. www.theevent.co.uk/Visitor/Where-and-When
TRAILBLAZER™ improves driver and crew effectiveness by extending the field of view beyond the normal spectrum, even in adverse weather and low-light conditions. It offers a new, best-in-class driver camera sub-system for military vehicle system integrators tasked with delivering to the most demanding specifications within tight timescales and budgets.[Continue reading →]
DSA832E Spectrum Analyzer by Rigol from Saelig Saelig Company Inc. announces a new entry in the Rigol DSA800 Spectrum Analyzer Series - DSA832E, a high performance, economical, and compact 9kHz to 3.2GHz Spectrum Analyzer. A tracking generator function is available with the “-TG” model. The digital IF circuitry guarantees reliability and performance that meets the most demanding RF applications. The rugged but very affordable DSA832E Spectrum Analyzer has a broad set of features and specs, including a large 8” WVGA color LCD and intuitive front panel controls. Available options include a preamplifier for very small signals, a VSWR measurement toolkit for configuring and evaluating antennas, as well as an advanced measurement kit that enables additional functions such as channel boundaries and signal-to-noise ratio measurements.
• 10Hz Minimum Resolution Bandwidth: with -148dBm Displayed Average Noise Level (DANL) for low-level signal measurements.[Continue reading →]
Grosshansdorf, Germany, 29 July 2016. Spectrum Instrumentation's release of a new line of arbitrary waveform generators (AWGs) based on the LXI instrumentation standard opens new doors for engineers and scientists who need to generate electronic signals in automated test and remote applications. The new generatorNETBOX series features seven new models to give users a wide choice of performance levels.
Technical Highlights: [Continue reading →]
Added multi-vendor support for benchtop, PXI and AXIe to One-Stop Calibration Services [Continue reading →]
Devart has released the new version of Skyvia, an online service for cloud data integration, backup, and management. The update delivers a lot of new features for Import - a member of Data Integration toolkit for cloud and relational data. The new Import features include UPSERT support for all data sources, greatly improved Lookup functionality, data filtering support, importing data from several related source objects to one target object, etc.[Continue reading →]
Spectrum\'s Embedded Server The acquisition and analysis of electronic signals in remote locations has become easy thanks to the release of a new option for Spectrum's Ethernet-based digitizer products. The Embedded Server option, DN2.xxx-Emb, can be ordered with any of the company's digitizerNETBOX series of LXI instruments. It effectively turns them into PC-based data acquisition units that can operate independently or, when connected to a LAN, as parts of a larger system.
The digitizerNETBOX family, with more than 30 different models, offers the widest choice of LXI-based data acquisition capabilities. Units are available with sampling rates from 200 KS/s up to 5 GS/s, resolutions of 8, 14 and 16 bit, bandwidths up to 1.5 GHz and from 2 to 16 fully synchronous channels. The units are normally controlled via Ethernet, however, installing the Embedded Server option allows fully independent operation. The Embedded Server option combines a powerful CPU, a freely accessible SSD, more memory and a remote software development access method using standard Linux remote shell (ssh). This enables an open platform where the user can run their own software while, at the same time, being still be connected via LAN for remote access. For example, with the option installed, the user could run a program to acquire and analyze electronic signals in a fully automated process. Then, whenever required, the user can choose to transfer just the information (waveform data or calculated results) that are needed in a client-server based software process.[Continue reading →]
Microstar Laboratories announced the Wave Synchronization Module software, now available with DAPtools Standard software. This module provides a real-time software-oriented approach to the problem of aligning data streams to the local power system frequency, obtaining greatly improved load harmonic measurements by avoiding data corruptions that are otherwise caused by sampling rate misalignment or power frequency drift. This software runs on xDAP data acquisition systems and is hosted by the DAPL 3000 embedded operating system, included with the DAPtools Software.[Continue reading →]
This paper outlines an Internet of Things (IoT) solution very similar to one implemented in an Intel manufacturing facility to show how data analytics applied to factory equipment and sensors can bring operational efficiencies and cost savings to manufacturing processes. The Intel pilot is forecasted to save millions of dollars annually along with additional return on investment business value. Likewise, this paper presents a solution that can help manufacturers benefit from the revolutionary advances in computer processing power, database technology, and tools for big data.
Precision RF Measurement Kits Saelig Company Inc. has introduced the RFP Smart Fieldmeter® Kits which contain all that is needed for making calibrated RF field strength measurements from 0.2MHz to 18GHz, including a calibrated field strength meter, a calibrated Omnifield Antenna®, and a 6” table tripod. Designed for budget-conscious RF engineers, the RFP Smart Fieldmeters combine the major features of professional quality test equipment with the convenience and simplicity of a multimeter. They can be used for the evaluation and measurements of electromagnetic fields from AM/FM/TV and GSM cellular stations, transmitters and CB radios, cellphones, microwave ovens, RFID antennas, industrial, scientific and medical equipment, etc. or in GTEM cells for the EMC testing of consumer, industrial, automotive and military products.
Multimode (Average, Peak and Pulse) operation allows monitoring of steady state as well as modulated fields. The kits’ portable lightweight design, long lasting battery, and detachable calibrated isotropic probe provide convenient field operation. Remote output monitoring can be used for data analysis, storage, and fast response closed-loop control. The tabletop tripod can be used for positioning the antenna probe and facilitates EM field measurements in a laboratory setting.[Continue reading →]
ORLANDO, Florida, February 23, 2016 – Micross Components (“Micross”), a global provider of
specialty electronic components with a 35-year history in providing authentic, high-reliability[Continue reading →]
The Spectrum M4i.77xx series of Digital Data Acquisition cards represent a major performance breakthrough for test engineers who require high-speed digital data logging with multi-channel logic analysis over extended time periods.[Continue reading →]
IAR Embedded Workbench maximizes code performance for the new flexible one-chip ARM Cortex-M0 product series with new capabilities for home appliance applications, digital audio solutions, and more[Continue reading →]
The Skyworks/Sequans platform, which is scalable to operator requirements worldwide, simplifies the design process, shortens OEM development time and significantly accelerates the launch of next generation LTE-based devices targeting low data rate, low power applications.[Continue reading →]
Nuremberg, Germany — Embedded World — February 23, 2016 — GrammaTech, a leading provider of software assurance, hardening, and cyber-security solutions, today announced expansion of CodeSonar’s static analysis engine to include binary analysis for ARM, the dominant processor of the Internet of Things (IoT). CodeSonar is the only commercially-available static analysis tool on the market to provide binary analysis, allowing engineering teams to analyze application software, middleware, and firmware.
Analyzing machine code has become extremely important in the expanding world of IoT, where deployed devices are subjected to countless cyber-attacks. Furthermore, according to VDC’s most recent report, in-house developed code now only accounts for 54% of a device’s software makeup. The remaining comes from commercial and open-source third parties riddled with risk, including software of uncertain provenance.[Continue reading →]
Multifaceted IoT Sensor Platform Mobile World Congress (MWC) – Barcelona, Spain – Feb. 22, 2016 – ON Semiconductor (Nasdaq: ON), driving energy efficiency innovations, teamed with RFMicron, and developed a game-changing ‘plug-and-play’ development tool to speed the deployment of wireless passive sensor solutions onto any Internet of Things (IoT) cloud platform. The IoT Platform Development Kit brings together a series of performance-optimized computing and connectivity modules to facilitate quick and effective deployment of battery-free wireless sensing technology and IoT hardware in locations where power and space constraints are of particular concern. This streamlined and flexible solution takes the approach of moving much of the system’s intelligence away from where the sensors are situated, and placing it on the cloud.
Each IoT Platform Development Kit incorporates ON Semiconductor’s battery-free wireless sensor tags, which use RFMicron’s Magnus® S2 Sensor IC, and can perform temperature, moisture, pressure, or proximity sensing functions. The platform also features a UHF RFID reader module with 32 decibels-milliwatt (dBm) power rating and an 860 megahertz (MHz) to 960 MHz frequency range. Localized data processing is performed by the ARM® Cortex-A8 based AM335x system-on-chip (SoC). The platform has the capacity to transfer captured data either wirelessly (via WLAN, Zigbee, Z-Wave, UHF Gen 2, etc.) or using wireline infrastructure (via KNX, CAN, SPI, Ethernet. etc.). This development kit complements ON Semiconductor’s existing wireless sensor evaluation kit, SPS1M-EVK, which provides a set of tools test our sensor capabilities.[Continue reading →]
Industrial systems designers now have a robust IO-Link(r) dual-channel transceiver that dissipates the lowest heat in the smallest package with the MAX14827 from Maxim Integrated Products, Inc. (NASDAQ: MXIM).[Continue reading →]
New Levels of Interaction Enable Highly Intuitive Connections between Cause and Effect in Development and Troubleshooting Highlights: * Streamlined multi-touch interface enables optimization of measurement parameters in two touches or less * First integrated 1 GHz analysis bandwidth simplifies test setup for analysis of wideband systems in radar and 5G research * Widest real-time streaming up to 255 MHz bandwidth enhances analysis of intermittent and highly elusive signals * Industry-best phase noise performance in all models addresses emerging needs in radar, LTE, and more[Continue reading →]
Curtiss-Wright Congratulates Northrop Grumman on Successful First Flight of the NATO Alliance Ground Surveillance Aircraft ASHBURN, Va. - December 19, 2015 – Curtiss-Wright’s Defense Solutions division applauds Northrop Grumman Corporation (NYSE: NOC) and members of NATO’s Alliance Ground Surveillance Management Agency (NAGSMA) on the recent successful first flight of NATO’s Alliance Ground Surveillance (AGS) unmanned aircraft system (UAS). Operating out of a manufacturing facility in Palmdale, Calif., a Northrop Grumman flight test team conducted the successful flight on December 19, 2015.
Curtiss-Wright is a valued partner on the AGS program, providing two critical onboard flight subsystems. Curtiss-Wright supplies the Integrated Mission Management Computer (IMMC) that controls the aircraft’s flight, and the Advanced Mission Management System (AMMS) that communicates with onboard sensors and relays information to the ground station. [Continue reading →]
>> Four switch input, four relay output [Continue reading →]
*Sixteen 250 MHz 16-bit analog input channels *Up to 61 TB of hot swappable SSD storage capacity *Real-time sustained recording rates up to 8 GB/sec *Most cost, size and space efficient recorder in its class[Continue reading →]
An architecture of Ethernet-based distribution systems, where terminal devices (mainly video surveillance cameras) use the same cable for power supply, has gained popularity. Such a solution was called the Power-over-Ethernet (or PoE). Fastwel offers its customers two new devices that use the above technology. These are: Network Embedded Module NIM354 and Rugged Gigabit Ethernet Network Switch NM350.[Continue reading →]
Libelium Waspmote devices connect to IBM Bluemix Cloud via Libelium\\\'s Meshlium gateway SAN MATEO, Calif., and ZARAGOZA, Spain — Libelium has integrated the IBM Bluemix Cloud platform with Waspmote wireless sensors, to enable developers to rapidly build, run, and manage applications based on data streams from Waspmote connected sensor devices, and reduce time-to-market for Smart Cities and IoT applications.
Now including Bluemix, Libelium’s Cloud connector framework is accessible through the Meshlium wireless gateway for easy configuration of Cloud systems without any further programming. Existing Meshlium customers can access the IBM Bluemix Cloud option by simply upgrading their Meshlium software. [Continue reading →]
RFEL\'s Correlator AX Newport, Isle of Wight, UK - RFEL has announced its new multi-channel, multi-rate correlator IP (Intellectual Property). The high performance Correlator AX™ core offers high sensitivity Unique Pattern (UP) detection from multiple, interleaved data streams with differing sample rates. The Correlator AX provides the ability to simultaneously analyse thousands of input channels obtained from different carriers in real time using advanced parallel processing. It can search for up to two Unique Patterns (UPs) on each channel and provides reliable identification with a low False Alarm Rate. The Correlator AX uses both cross-correlation and auto-correlation techniques to provide maximum performance.
Correlator AX IP will be launched at the 52nd AOC Conference in Washington DC, USA on booth 347 on 1-3 December 2015. https://crows.org/conventions/2015.html[Continue reading →]
SAN JOSE, Calif. – Cavium, Inc. (NASDAQ: CAVM), a leading provider of products that enable secure and intelligent processing for enterprise, data center, wired and wireless networking, today announced the LiquidSecurity™ Hardware Security Module (HSM) Family, a complete Hardware Based Transaction Security Solution. The LiquidSecurity™ HSM family provides a FIPS 140-2 level 2 and 3 partitioned, centralized and elastic key management solution with the highest transaction/sec performance. It addresses the high performance security requirements for private key management and administration while also addressing elastic performance per virtual / network domain for the virtualized cloud environment. This product family is available as a PCI Express adapter with complete software and also as a HSM appliance for evaluation or deployment. It offers a no compromise, fully secure and cost efficient solution that addresses the stringent security requirements of SaaS applications, Ecommerce payment systems and Enterprise, Banking and Government security applications especially as they migrate to the Public or Private cloud. Major applications for this product family include Key Management as-a-Service, Database as-a-Service, Crypto as-a-service, Secure DNS, SaaS Applications, Virtual Private Clouds in the Public Cloud and Payment systems.
Certifications [Continue reading →]
Austin, Texas, November 16, 2015 - GIGABYTE Technology, a leading creator of high performance server hardware, announced today availability of their extensive Cavium, Inc., (NASDAQ: CAVM) ThunderX-based server portfolio. All platforms are now available for order, and shipments to numerous end customers and OEMs have already begun.
The Gigabyte ThunderX-based servers available for order include: [Continue reading →]
SAN FRANCISCO, CA -- PubNub, the world’s leading Data Stream Network for mobile applications, today announced the release of BLOCKS, a set of customizable microservices that give developers a simple way to add code and deploy features for realtime apps.PubNub BLOCKS executes business logic directly on the data streaming through Pubnub’s network without splitting it off to an intermediary server controlled by the customer. This revolutionary approach streamlines app development, reduces endpoint-to-endpoint latency, and allows apps to better leverage the enormous scalability of PubNub’s Data Stream Network.
The Challenge [Continue reading →]